 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
COOLING SYSTEM SERVICE - CONTINUED
0060 00
DRAINING
WARNING
DO NOT service cooling system unless engine has been allowed to cool down. This is a pres-
surized cooling system and escaping steam or hot coolant will cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down.
Loosen cap to first stop and let any pressure out of cooling system, then remove cap. Failure to
follow this warning may cause serious burns.
Wear effective eye, glove and skin protection when handling coolants. Failure to do so may
cause injury.
NOTE
Cooling system capacity is 12 gal. (45 l).
If machine is to be stored in or shipped to an area with below freezing temperatures, cooling
system must protected to lowest expected ambient temperature.
1.
Slowly loosen filler cap (1) to relieve pressure from
1
the radiator. Remove filler cap.
386-117
2.
Place a suitable container beneath drain valve (2) on
3
2
outlet pipe (3). Open radiator drain valve and allow
coolant solution to drain.
386-139
0060 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals