 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
SECONDARY FUEL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0056 00
REMOVAL
1.
Remove filter element. See Filter Element Replacement in this work package.
2.
Remove fuel pressure gage (WP 0168 00).
3.
Disconnect fuel inlet line (4) from elbow (5).
9 (HIDDEN)
6 (HIDDEN)
5
4.
Remove elbow (5) from filter base (3). Remove and
4
discard O-ring (6).
3
5.
Remove two capscrews (7) and flatwashers (8).
6.
Remove filter base (3) and gasket (9). Discard gasket.
386-128
7,8
INSTALLATION
NOTE
Wipe all sealing surfaces clean and dry before installation.
Lightly coat new O-ring with clean fuel before installation.
1.
Install new gasket (9) and filter base (3) with two capscrews (7) and flatwashers (8).
2.
Install new O-ring (6) and elbow (5) to filter base (3).
3.
Connect fuel inlet line (4) to elbow (5).
4.
Install filter element. See Filter Element Replacement in this work package.
5.
Install fuel pressure gage (WP 0168 00).
6.
Prime fuel system (WP 0038 00).
7.
Run engine and check for proper operation and fuel leaks (TM 5-2410-233-10).
END OF WORK PACKAGE
0056 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals