 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TURBOCHARGER OIL LINES AND MOUNTING BRACKET REPLACEMENT - CONTINUED
0048 00
INSTALLATION
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Install new O-ring (24) on connector (11) and install connector on mounting bracket assembly (25).
2.
Install new O-rings (22 and 23) on mounting bracket assembly (25).
3.
Place mounting bracket assembly (25) in position on engine block and install two capscrews (18) and washers (19).
4.
Install capscrew (20) and washer (21).
5.
Place new gasket (17) in position on line (5).
6.
Place new seal (14) on line (3) and slide line into adapter (13).
7.
Place new gasket (15) on adapter (13) and new gasket (16) at the top of line (3).
8.
Place line (3) in position and install two capscrews (12).
9.
Place line (5) in position and tighten nut (10) to connector (11).
10.
Install two capscrews (4) to top of oil line (5).
4
11.
Install two capscrews (1) and washers (2).
12.
Place clamp (9) in position on lines (3 and 5) and
install capscrew (7), two washers (8) and nut (6).
5
1,2
3
9
386-100
6,7,8
13.
Run engine and check for proper operation and oil leaks (TM 5-2410-233-10).
END OF WORK PACKAGE
0048 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals