 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TURBOCHARGER AIR LINE REPLACEMENT - CONTINUED
0047 00
REMOVAL - CONTINUED
2.
Remove upper end of tube assembly (4) from engine intake pipe (2).
3.
Remove lower end of tube assembly (4), adapter (5) and O-ring (6) from governor (7). Discard O-ring.
4.
Remove five short capscrews (8), long capscrew (9), washer (10), engine intake pipe (2) and gasket (11) from intake
manifold. Discard gasket.
2
9,10
2
8
4
386-245
386-240
11 (HIDDEN)
5,6 (HIDDEN)
7
INSTALLATION
NOTE
Wipe all sealing surfaces clean and dry before installing new gasket and O-ring. Apply a light
film of clean lubricating oil to new O-ring and seals before installation.
1.
Install new gasket (11) and engine intake pipe (2) on intake manifold with five short capscrews (8), washer (10) and
long capscrew (9).
2.
Install new O-ring (6), adapter (5) and lower end of tube assembly (4) to governor (7).
3.
Install upper end of tube assembly (4) to engine intake pipe (2).
4.
Install two new seals (3) on each end of elbow (1) and insert one end of elbow in engine intake pipe (2).
5.
Install air cleaner (WP 0043 00).
6.
Install turbocharger (WP 0046 00).
7.
Install turbocharger oil lines (WP 0048 00).
8.
Install muffler (WP 0058 00)
9.
Crank engine for 10 seconds before starting to pre-lubricate turbocharger.
10.
Run engine and check for proper operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0047 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals