 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FUEL INJECTION LINES AND FITTINGS REPLACEMENT - CONTINUED
0041 00
INSTALLATION - CONTINUED
7.
Bleed air from fuel system as follows:
a.
Place a suitable container under drain hose (6) at fuel system bleed valve petcock (7).
b.
Open fuel system bleed valve petcock (7).
c.
Operate fuel priming pump until no air bubbles can be seen in fuel.
d.
Close fuel system bleed valve petcock (7).
6
6
386-777
7
e.
Loosen nut of fuel injection line (3) to fuel injection nozzle (5) at cylinder no. 6.
f.
Operate fuel priming pump until no air bubbles can be seen at fuel injection nozzle (5).
g.
Tighten fuel injection line nut at fuel injection
5
3
nozzle (5) to 30 lb-ft (41 Nm).
h.
Repeat steps e, f and g, working from fuel injec-
tion nozzle (5) at cylinder no. 5 to cylinder no. 1.
8.
Run engine and check for proper operation and fuel
leaks (TM 5-2410-233-10).
386-776
END OF WORK PACKAGE
0041 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals