 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FUEL INJECTION LINES AND FITTINGS REPLACEMENT - CONTINUED
0041 00
REMOVAL - CONTINUED
WARNING
Use care in removal of fuel injection lines to prevent twisting or bending of lines, which can affect fuel flow
to engine or cause fuel leaks and possible fire. Failure to follow this warning may cause injury or death.
CAUTION
Cap all fuel injection lines and plug all openings in fuel metering pump after removal to pre-
vent dirt from getting into fuel system. Contamination of fuel system could result in prema-
ture failure.
Fuel injection nozzles can be permanently damaged by twisting, if only one wrench is used to
loosen or tighten fuel injection line nuts. Use one wrench to hold nozzle and a second wrench
to loosen nut.
NOTE
Use line wrenches when removing fuel injection lines.
Removal procedures for all clamps securing fuel injection lines are the same. Tag and mark
location of each clamp assembly to ensure correct installation.
Removal procedures for fuel injection lines from fuel components are the same. Tag and mark
routing and location of each fuel line removed, to ensure correct installation.
1.
Remove capscrews (1) and clamps (2) from fuel injection line (3).
2.
Disconnect fuel injection line (3) from fuel injection pump (4).
2
3
1
3
4
386-777
0041 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals