 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
FUEL PRIMING PUMP REPLACEMENT - CONTINUED
0038 00
INSTALLATION
1.
Position new gasket (4) and fuel priming pump (3) on primary fuel filter base (5).
2.
Install two capscrews (1) and washers (2).
3.
Turn fuel shutoff valve to ON position.
6
FUEL SHUTOFF
VALVE
3
1,2
1,2
4
5
386-124
386-044
4.
Prime fuel system. Refer to Priming Fuel System in this work package.
PRIMING FUEL SYSTEM
1.
Unscrew knob (6) on fuel priming pump (3) until it is free to pump.
2.
Place a suitable container under fuel system bleed valve drain hose and open fuel system bleed valve (7).
3.
Pump several times. System is primed when fuel pres-
7
8
sure gage (8) returns to zero immediately after pump-
ing has stopped and fuel flows from bleed valve (7)
without air bubbles.
4.
Tighten knob (6) and close bleed valve (7).
5.
Run engine and check for proper operation and fuel
leaks (TM 5-2410-233-10).
386-775
END OF WORK PACKAGE
0038 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals