 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
EXHAUST MANIFOLD REPLACEMENT - CONTINUED
0034 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may cause injury.
NOTE
To ensure correct tightening, start with inner nuts and move to the outside.
3.
Position exhaust manifold (4) on studs and install ten washers (8) and nuts (7). Tighten nuts to 32 lb-ft (43 Nm).
4.
Install two washers (6) and spacers (5) in location as noted during removal.
5.
Install heat shield (3) on exhaust manifold (4) with two washers (2) and nuts (1). Tighten nuts to 32 lb-ft (43 Nm)
6.
Install fuel injection lines (WP 0041 00).
7.
Install turbocharger (WP 0046 00).
8.
Run engine and check for proper operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0034 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals