 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ENGINE ASSEMBLY REPLACEMENT - CONTINUED
0019 00
INSTALLATION
CAUTION
Remove caps from lines and remove plugs from openings as installations are made. Wipe all line ends, line
fittings and mounting surfaces clean. Contamination of fuel system could result in premature failure.
1.
Position shims (22) into the exact location from which
they were removed. Be sure locating pins (23) are in
position on main frame.
386-178
22
23
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
CAUTION
Always use a load leveler when lifting engine assembly. This will keep lifting force vertical at
all times, avoiding damage to lifting brackets.
Engine assembly must be lifted so that crankshaft centerline is horizontal. This will prevent
binding on rear engine mount locating pins.
NOTE
Weight of engine and torque divider is approximately 3,000 lb (1,361 kg).
2.
Attach a load leveler and suitable lifting device to engine lifting brackets IAW illustration.
0019 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals