 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ENGINE OIL COOLER REPLACEMENT - CONTINUED
0018 00
REMOVAL - CONTINUED
4.
Remove four capscrews (7) from elbow assembly (8).
5.
Remove engine oil cooler (9) and gasket (10) from elbow assembly (8). Discard gasket.
INSTALLATION
1.
Install engine oil cooler (9) and new gasket (10) on elbow assembly (8) with four capscrews (7). Tighten capscrews to
32 lb-ft (45 Nm).
2.
Install inlet housing (3) and new gasket (6) on engine oil cooler (9) with three washers (5) and capscrews (4). Tighten
capscrews to 32 lb-ft (44 Nm).
3.
Install engine oil level gage tube (WP 0011 00).
4.
Position two clamps (1) onto hose (2).
5.
Install hose (2) on water inlet housing (3) and tighten clamps (1).
7
10
6
5
4
3
1
8
9
386-073
2
6.
Install oil filter base (WP 0010 00).
7.
Fill cooling system (WP 0060 00).
8.
Run engine and check for proper operation and leaks (TM 5-2410-233-10).
END OF WORK PACKAGE
0018 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals