 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ENGINE OIL AND OIL FILTER ASSEMBLY MAINTENANCE - CONTINUED
0010 00
OIL FILTER BASE DISASSEMBLY - CONTINUED
NOTE
22
Do not remove stud unless inspection shows
9
need for replacement.
3.
Remove plug (22). If damaged, remove stud (23)
from oil filter base (9).
21
OIL FILTER BASE ASSEMBLY
20
1.
Install plug (22) and, if removed, install stud (23)
into oil filter base (9).
19
2.
Install plungers (21) and springs (20) into oil filter
base (9).
23
3.
Place covers (18) with new gaskets (19) into posi-
tion and install four washers (17) and capscrews
(16).
18
17
386-105
16
OIL FILTER BASE INSTALLATION
1.
Install new O-rings (15) into oil filter base (9).
2.
Place oil filter base (9) into position on engine and install washer (12), capscrew (11), washers (14) and capscrews (13).
3.
Install oil filter. See Oil Filter Replacement in this work package.
4.
Fill crankcase with oil. See Changing Engine Oil in this work package.
5.
Run engine and inspect oil filter base (9), oil filter (10) and tubing for leaks (TM 5-2410-233-10).
END OF WORK PACKAGE
0010 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals