SERVICE - TM-5-2410-233-100140

TM 5-2410-233-10

AIR CLEANER SERVICE - CONTINUED

0014 00

SERVICE - CONTINUED

Inspect gasket on inside of cover. If damaged, notify Unit Maintenance.

Remove primary filter element from air cleaner housing.

Thoroughly wipe clean inside of air cleaner housing with rag.

GASKET

COVER

PRIMARY

FILTER

ELEMENT

HOUSING

386-297

Check sealing surfaces on primary filter element for dirt on the "clean" side. If this is evident, problem may be a damaged

filter element, incorrect element fit or the need for cleaning sealing surfaces.

WARNING

Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when

drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT

direct compressed air against human skin. Failure to follow this warning may cause injury or death. Make

sure air stream is directed away from user and other personnel in the area. To prevent injury, user must

wear protective goggles or face shield.

CAUTION

To prevent damage, do NOT clean primary filter element by bumping or tapping.

NOTE

Use a light inside primary filter element to inspect filter for tears, holes or other damage before and after each

cleaning process.

Discard primary filter element if any damage is evident.

0014 00-2