Recoverability Code - TM-10-3930-626-24P0011

SECTION I

TM10-3930-626-24P

Code

Item requires special handling or condem-

A-

Application/Explanation

nation procedures because of specific

Unit maintenance or Aviation unit is the

O-

reasons- (e.g., precious metal content, high

lowest level that can do complete repair of

dollar value, critical material, or hazardous

the item.

material).

Refer

appropriate

manuals/directives for specific instructions.

F-

Direct support or aviation intermediate is

the lowest level that can do complete

c. FSCM (Column (3)). The Federal Supply Code

repair of the item.

for Manufacturer (FSCM) is a 5-digit numeric code

which is used to identify the manufacturer, distributor,

General support is the lowest level that

H-

or Government agency, etc., that supplies the item.

can do complete repair of the item.

d. PART NUMBER (Column (4)). Indicates the

Specialized repair activity is the lowest

primary number used by the manufacturer (individual,

L-

level that can do complete repair of the

firm,

company,

corporation or

Government

item.

activity)which controls the design and characteristics of

Depot is the lowest level that can do com-

the item by means of its engineering drawings,

plete repair of the item.

specifications standards and inspection requirements

D-

to identify an item or range of items.

Nonreparable. No repair is authorized.

Z-

NOTE. When you use a NSN to requisition an item, the

No repair is authorized. (No parts or spe-

item you receive may have a different part number

B-

cial tools are authorized for the main-

from the part ordered.

tenance of a "B" coded item). However,

the item may be reconditioned by adjust-

e. DESCRIPTION AND USABLE ON CODE

ing, lubrication, etc., at the user level.

(UOC) (Column (5)). This column includes the

following information:

(3) Recoverability Code. Recoverability codes

(1) The Federal item name and, when

are assigned to items to indicate the disposition action

required, a minimum description to identify the item.

on unserviceable items. The recoverability code is

entered in the fifth position of the SMR Code as

(2) Physical security classification. Not

follows:

applicable.

Application/Explanation

Code

(3) Items that are included in kits and sets are

Nonreparable item. When unserviceable,

listed below the name of the kit or set on Figure KIT.

Z-

condemn and dispose of the item at the

(4) Spare/repair parts that make up an

level of maintenance shown in 3d position

assembled item are listed immediately following the

of SMR Code.

assembled item line entry.

Reparable item. When uneconomically

(5) Part numbers for bulk materials are

O-

reparable, condemn and dispose of the

referenced in this column in the line item entry for the

item at unit maintenance or aviation unit

item to be manufactured/fabricated.

level.

(6) When the item is not used with all serial

Reparable item. When uneconomically

numbers of the same model, the effective serial

reparable, condemn and dispose of the

F-

numbers are shown on the last line(s) of the

item at the Direct support or aviation inter-

description (before UOC). Not applicable.

mediate level.

(7) The usable on code, when applicable (see

Reparable item. When uneconomically

paragraph 5, Special information).

reparable, condemn and dispose of the

H-

item at the General support level.

(8) In the Special Tools List section, the basis

of issue (BOI) appears as the last line(s) in the entry

Reparable item. When beyond lower level

for each special tool, special TMDE, and other special

repair capability, return to depot. Condem-

support equipment. When density of equipment

nation and disposal of item not authorized

D-

supported exceeds density spread indicated in the

below depot level.

basis of issue, the total authorization is increased

proportionately.

Reparable item. Condemnation and dis-

posal of item not authorized below special-

(9) The statement "END OF FIGURE" appears

L-

ized repair activity (SRA).

just below the last item description in Column 5 for a

given figure in both Section II and Section Ill.