|
| |
TM 10-3930-409-24P
UNIT, DIRECT, SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND
SPECIAL TOOLS LISTS
SECTION I. INTRODUCTION
1.
Scope.
This RPSTL lists and authorizes spares and repair parts;
special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment
required for performance of Unit, Direct Support, and
General Support Maintenance of the Wheeled Warehouse
Tractor. It authorizes the requisitioning, issue, and
disposition of spares, repair parts and special tools as
indicated by the source, maintenance and recoverability
(SMR) codes.
2.
General.
In addition to Section I. Introduction, this Repair Parts and
Special Tools List is divided into the following sections:
a.
Section II. Repair Parts List. A list of spares and
repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts
which must be removed for replacement of the authorized
parts. Parts lists are composed of functional groups in
ascending alphanumeric sequence, with the parts in each
group listed in ascending figure and item number
sequence. Bulk materials are listed in item name
sequence. Repair kits are listed separately in their own
functional group within Section II. Repair parts for
reparable special tools are also listed in the section. Items
listed are shown on the associated illustration (s) /figure (s).
b.
Section III. Special Tools List. A list of special
tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue
(BOI) information in DESCRIPTION AND USABLE ON
CODE column) for the performance of maintenance.
c.
Section IV. Cross-reference Indexes. A list, in
National Item Identification Number (NIIN) sequence, of all
National stock numbered items appearing in the listing,
followed by a list in alphanumeric sequence of all part
numbers appearing; in the listings. National stock
numbers and part numbers are cross-referenced to each
illustration figure and item
number appearance. The figure and item number index
lists figure and item numbers in alphanumeric sequence
and cross-references NSN, CAGEC, and part numbers.
3.
Explanation of Columns (Sections II and III).
a.
ITEM NO. (Column (1)). Indicates the number
used to identify items called out in the illustration.
b.
SMR
CODE
(Column
(2)).
The
Source,
Maintenance, and Recoverability (SMR) code is a 5-
position
code
containing
supply/requisitioning
information, maintenance category authorization criteria,
and disposition instructions, as shown in the following
breakout:
*Complete Repair: Maintenance capacity, capability, and
authority to perform all corrective maintenance tasks of the
"Repair" function in a use/user environment in order to
restore serviceability to a failed item.
(1) Source Code. The source code tells you how
to get an item needed for maintenance, repair, or overhaul
of an end item/equipment. Explanations of source codes
follows:
1
|
