Figure 4. Securing front gladhand bracket

MWO 9-2320-287-35

(3), and nut (4).

Secure gladhand bracket (1) with capscrew (2), lockwasher

S e c u r i n g front gladhand bracket

F i g u r e 4.

i. Measure, mark and drill one 5/16 inch (7.9 mm) diameter hole 1 inch (2.5 cm)

above headlight guard (5) and 1/2 inch (1.3 cm) from back of grill guard (6).

NOTE

Hole that is being drilled in step i will be used later on in

this procedure.

Perform steps a through i on right side of the M911 Truck Tractor.

Drilling front hose clip hole

F i g u r e 5.