Vehicle Preparation. M916, M917, M918, M919 and M920.

MWO 9-2320-273-20-l

NOTE

Step 4 is performed to verify check valve installed in paragraph b., step 6

is functioning properly and air pressure (required for shifting) is maint-

ained in the new air tank only.

(4) Engage~ transmission air charging valve knob and shift from first gear through fifth gear ran-

ges.

(5) Return transmission to neutral and disengage transmission air charging valve knob.

(6) Repeat step 1 and road test vehicle (refer to TM 9-2320-273-10).

NOTE

Spot paint as needed.

M916, M917, M918, M919 and M920.

a. Vehicle Preparation. M916, M917, M918, M919 and M920.

(1) Drain air system (refer to TM 9-2320-273-10).

(2) Remove plug from front of air tank as shown in figure 1.

FIGURE