Click here to make tpub.com your Home Page

Page Title: FAULT CODE 051: FAULTY FLAME RECOGNITION. (Cont)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-364-34-1
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical circuits, a
direct short may result. Damage to equipment, injury or death to personnel may occur.
NOTE
Arctic heater flame sensor resistance is between 900 ohms at -13_F (-25_C) and 1100 ohms at 77_F (25_C).
(1) Ensure arctic heater temperature is
between -13_ and 77_F (-25_ and 25_C).
(2) Remove cover from arctic heater
(TM 9-2320-364-20).
(3) Disconnect arctic heater unit harness
connector from arctic heater control unit
(TM 9-2320-364-20).
(4) Remove three screws and arctic heater
control unit (Para 18-2.2).
(5) Connect positive (+) lead to gray wire at
arctic heater internal harness connector,
terminal 15.
(6) Connect negative (-) lead to gray wire at
arctic heater internal harness connector,
terminal 16.
(7) Is resistance across arctic flame sensor
between 900 and 1100 ohms at room
temperature?
(a) If resistance reading is not between
900 and 1100 ohms at room
temperature, replace flame sensor
(Para 18-2.2).
(b) If resistance reading is between 900
and 1100 ohms at room temperature,
replace arctic heater control unit
(Para 18-2.2).
2-831-65
2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business