CRANE FAILS LOAD TEST. (Cont) -726250761

TM 9-2320-364-34-1

Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical

circuits a direct short may result. Damage to equipment, injury or death to personnel may result.

Do not stand under crane. Mechanical failure and operator error can cause injury or death to

personnel.

OPERATION TEST (CONT).

(20) Start engine (TM 9-2320-364-10).

(21) Set WINCH/CRANE switch to

CRANE position.

(22) Set hydraulic selector switch to

CRANE/SRW position.

(23) Turn ON crane main POWER

switch.

(24) Adjust clarity of display using

control knob on bottom of test

unit.

(a) If display does not come on,

perform Steps (25) through (27)

and repair green wire

(see schematic Fig 2-7) or

replace harness (Para 6-29)

from OSS box top connector to

crane main junction box.

(b) If display comes on, go to

Step 2 of this Fault.

(25) Set crane main POWER switch to

OFF position.

(26) Set hydraulic selector switch to

OFF position.

(27) Turn OFF ENGINE switch.

2-677