LHS HOOK ARM DISENGAGES FROM FLATRACK WHILE UNLOADING. (Cont) -726250495

TM 9-2320-364-34-1

NOTE

The 1/8 in. (3.175 mm) measurement is for the

bottom of the hook bar only.

WEAR MEASUREMENT TEST

Measure the amount of wear on the hook

bar.

(1) If wear at lower back side of hook

bar is 1/4 in. (6.35 mm) or less,

and 1/8 in. (3.175 mm) or less at

bottom of hook bar, hook bar is

OK. Go to Step 2 of this Fault.

(2) If wear at lower back side of hook

bar is greater than 1/4 in. (6.35

mm) or greater than 1/8 in. (3.175

mm) at bottom of hook bar, repair

flatrack hook bar. Refer to

TM 9-3990-206-14&P. Verify

repair and go to Step 4 of this

Fault.

2-411