LOSS OF MIDDLE FRAME LOAD HOLDING. (Cont) -726250493

TM 9-2320-364-34-1

All personnel must stand clear during lifting operations. A swinging or shifting load may cause injury or

death to personnel.

VERIFY REPAIR

(1) Position LHS hook to rear of truck

and engage hook on steel tube

supported by jackstands.

(2) Using LHS, lift truck only enough to lift

vehicle weight off suspension. Do not

lift tires off ground.

(3) Set hydraulic selector switch to

OFF position (TM 9-2320-364-10).

(4) Turn OFF ENGINE switch.

(a) If middle frame does not hold

weight off vehicle suspension,

fault not corrected. Perform

Steps (5) through (8) below and

notify supervisor.

(b) If middle frame does hold weight

off vehicle suspension, fault

has been corrected.

(5) Disengage hook from steel tube.

(6) Put LHS in transit position.

(7) Set hydraulic selector switch

to OFF position.

(8) Turn OFF ENGINE switch.