Click here to make tpub.com your Home Page

Page Title: Table 2-1. DDEC II System Code Index
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-364-34-1
Table 2-1. DDEC II System Code Index
Code
Affected
Description
Number
Sensor
11
Vernier Control
System on for 2 seconds with too low a voltage at the Vernier
Control input to the DDEC ECM.
12
Vernier Control
System on for 2 seconds with too high a voltage at the
Vernier Control input to the DDEC ECM.
14
Oil Temperature (OTS)
Engine running for 8 minutes with too high a voltage at the
OTS input to the DDEC ECM.
15
Oil Temperature (OTS)
Engine running for 2 seconds with too low a voltage at the
OTS input to the DDEC ECM.
21
Throttle Position (TPS)
System running for 2 seconds with too high a voltage at the
TPS input to the DDEC ECM.
22
Throttle Position (TPS)
System running for 2 seconds with too low a voltage at the
TPS input to the DDEC ECM.
23
Fuel Temperature (FTS)
Engine running for 8 minutes with too high a voltage at the
FTS input to the DDEC ECM.
24
Fuel Temperature (FTS)
Engine running for 2 seconds with too low a voltage at the
FTS input to the DDEC ECM.
25
NO CODES - No faults have been detected by DDEC since
the last time the codes were cleared.
32
ECM FAILURE - The backup system inside the DDEC ECM
has failed.
33
Turbo Boost (TBS)
Engine running (at less than 800 RPM or less than 30% of
maximum torque) for 5 seconds with too high a voltage at
the TBS input to the DDEC ECM.
34
Turbo Boost (TBS)
Engine running for 2 seconds with too low a voltage at the
TBS input to the DDEC ECM.
35
Oil Pressure (OPS)
Engine running for 2 seconds at less than 800 RPM with too
high a voltage at the OPS input to the DDEC ECM. Oil
temperature must be greater than 60 degrees C to log this
code.
36
Oil Pressure (OPS)
Engine running for 2 seconds with too low a voltage at the
OPS input to the DDEC ECM.
41
Timing Reference (TRS)
The number TRS pulses received per revolution was
incorrect or completely missing. One pulse per cylinder per
revolution is required.
42
Synchronous Reference (SRS)
Did not receive an SRS pulse on every firing of the #1
cylinder.
44
HIGH OIL TEMPERATURE - System running for 2 seconds
with the oil temperature greater than a calibrated limit.
45
LOW OIL PRESSURE - Engine running with the oil pressure
less than the limit (different limits at different RPM's) for 7
seconds.
46
LOW BATTERY VOLTAGE - Engine running with low
battery voltage (less than 10 volts) for more than 30 seconds.
51
EEPROM ERROR - An error has been detected in the
EEPROM (Electrically Erasable, Programmable, Read Only
Memory) inside the DDEC ECM.
2-9

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business