Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT). -726280122

TM 9-2320-364-20-1

2-9. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)

TABLES (CONT).

Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT).

Interval

Item to Be

Procedure

Not Mission

Item

Inspected

Capable If:

No.

Semi-

Hydraulic

a. Inspect universal joints (1) for looseness.

a. Movement of

Annual

Pump

universal joints.

Driveshaft

b. Inspect slip yoke (2) for looseness.

b. Movement of

slip yoke.

NOTE

If an air-operated grease gun does not purge

the fitting, use a hand-operated grease gun.

If the part does not purge, remove fitting

and clean, install fitting and grease again. If

part still does not purge, refer to

maintenance task for that component.

When using a grease gun, apply lubricant to

the fitting until clean lubricant squeezes out

of the part being lubricated.

c. Lubricate the hydraulic pump driveshaft

c. Fittings will not

with GAA every 3,000 miles (4,828 km)

purge old lubricant

or semiannually, whichever comes first.

of component.

Semi-

Transmission

Check transmission for cracks, leaks or

Obvious cracks, damage

Annual

obvious damage.

or leaks are found.

2-56