Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT). -726280108

TM 9-2320-364-20-1

Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT).

Interval

Item to Be

Procedure

Not Mission

Item

Inspected

Capable If:

No.

NOTE

51.1

Semi-

Annual

Air system of truck must be charged

prior to performing the following steps.

Lifting frame must be in stowed

position prior to performing the

following steps.

a. If truck is equipped with Container Handling

Unit (CHU), pull flipper lock pin handle (1)

out and lift air valve lever (2) up to rotate

flipper bracket (3) and flipper bracket lock

plate (4) onto pivot pin (5).

b. Ensure flipper bracket (3) and flipper bracket

lock plate (4) align with and position over

pivot pin (5). If flipper bracket lock plate (4)

does not align with and position over pivot

pin (5), adjust cone weldments (Para 18-13).

c. Pull flipper lock pin handle (1) out and push

air valve lever (2) down to rotate flipper

bracket (3) and flipper bracket lock plate (4)

off of pivot pin (5).

d. Repeat steps (a) through (c) for other side of

truck.

2-22.2