Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT). -726280099

TM 9-2320-364-20-1

Table 2-1. Unit Level Preventive Maintenance Checks and Services (PMCS) (CONT).

Interval

Item to Be

Procedure

Not Mission

Item

Inspected

Capable If:

No.

Semi-

Transfer

a. Check transfer case oil seals for cuts,

a. Damage or leaks are

Annual

Case Oil

nicks, gouges and leaks.

found.

Seals

b. Check transfer case for leaks, cracks,

b. Damage or leaks are

dents, damage and loose bolts.

found.

Drycleaning Solvent (P-D-680) is TOXIC

and flammable. Wear protective goggles,

face shield, and gloves; use only in a

well-ventilated area; avoid contact with

skin, eyes, and clothes, and do not breathe

vapors. Keep away from heat or flame.

Never smoke when using solvent. The

flashpoint for Type II Drycleaning Solvent

is 140 degrees F (60 degrees C) and Type

III Drycleaning Solvent is 200 degrees F

(93 degrees C). Failure to do so may result

in injury or death to personnel.

If personnel become dizzy while using

cleaning solvent, immediately get fresh air

and medical help. If solvent contacts skin

or clothes, flush with cold water. If solvent

contacts eyes, immediately flush eyes with

water and get immediate medical attention.

2-35