 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
NOTE
Procedure is the same for all vehicles except as noted
1.
REMOVE LOCK NUT (1), WASHER (2), SCREW (3), WASHER (4), AND LATCH (5). DISCARD LOCK NUT.
2.
REMOVE LOCK NUT (6), WASHER (7), SCREW (8), WASHER (9), AND BRACKET (10) FROM STORAGE BOX
(11). DISCARD LOCK NUT.
NOTE
Perform step 3 for M915A2 or step 4 for all except M915A2.
3.
REMOVE TWO LOCK NUTS (12), TWO WASHERS (13), VEHICLE JACK MOUNTING BRACKET (14), TWO
SCREWS (15), TWO WASHERS (16), AND CABLE (17) FROM STORAGE BOX (11). DISCARD LOCK NUTS.
4.
REMOVE TWO LOCK NUTS (12), TWO WASHERS (13), VEHICLE JACK MOUNTING BRACKET (14), TWO
SCREWS (15), AND TWO WASHERS (16) FROM STORAGE BOX (11). DISCARD LOCK NUTS.
5.
IF DAMAGED, REMOVE PAD (18).
CLEANING/INSPECTION
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
NOTE
Perform step 1 for M915A2 or step 2 for all except M915A2.
1.
INSTALL CABLE (1 7), TWO WASHERS (16), TWO SCREWS (15), VEHICLE JACK MOUNTING BRACKET (14),
TWO WASHERS (13), AND TWO NEW LOCK NUTS (12) IN STORAGE BOX (11). COAT LOCK NUTS WITH
SEAL 'N' CAULK.
2.
INSTALL TWO WASHERS (16), TWO SCREWS (15), VEHICLE JACK MOUNTING BRACKET (14), TWO
WASHERS (13), AND TWO NEW LOCK NUTS (12) IN STORAGE BOX (11). COAT LOCK NUTS WITH SEAL 'N'
CAULK.
3.
INSTALL BRACKET (10), WASHER (9), SCREW (8), WASHER (7), AND NEW LOCK NUT (6). COAT LOCK NUT
WITH SEAL 'N' CAULK.
4.
INSTALL LATCH (5), WASHER (4), SCREW (3), WASHER (2), AND NEW LOCK NUT (1) IN STORAGE BOX (11).
5.
IF PAD (18) WAS REMOVED, APPLY ADHESIVE-SEALANT AND INSTALL NEW PAD.
Change 3 4-791
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals