 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
NOTE
If bushings were removed during Rear Slack Adjuster and S-Cam Replacement, do
not perform step 2.
2.
REMOVE TWO BUSHINGS (5) FROM TUBE OF BRAKE CHAMBER BRACKET (3). DISCARD BUSHINGS.
3.
REMOVE 16 LOCK NUTS (6), 16 WASHERS (7), 16 FLANGE BOLTS (8), 16 WASHERS (9), AND SPIDER (4)
FROM AXLE FLANGE (10). DISCARD LOCK NUTS.
CLEANING/INSPECTION
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
1.
INSTALL SPIDER (1), 16 WASHERS (2), 16 FLANGE BOLTS (3), 16 WASHERS (4), AND 16 NEW LOCK NUTS
(5) ON AXLE FLANGE (6). TIGHTEN LOCK NUTS TO 150-175 LB-FT (203.4-237.3 N.m) IN SEQUENCE
SHOWN.
4-435
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals