 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
4.
TRACE MAIN HARNESS (1) TO JUMPER HARNESS AT ECU AND DISCONNECT.
5.
REMOVE NUT (4) AND MAIN HARNESS LEAD (5) FROM STARTER MOTOR (6).
6.
REMOVE BOLT (7) AND MAIN HARNESS GROUND (8) FROM ENGINE BLOCK (9).
7.
CONNECT MAIN HARNESS GROUND (8) TO ENGINE BLOCK (9) AND INSTALL BOLT (7).
8.
CONNECT MAIN HARNESS LEAD (5) TO STARTER MOTOR (6) AND INSTALL NUT (4).
9.
CONNECT MAIN HARNESS (1) TO JUMPER HARNESS AT ECU.
10.
CONNECT MAIN HARNESS (1) TO ETHER CONTROL RELAY HARNESS (3).
11.
CONNECT MAIN HARNESS (1) TO ETHER FILTER HARNESS (2).
12.
INSTALL TIE WRAPS TO SECURE MAIN HARNESS (1) IN SAME POSITION AS REMOVAL.
Change 3 4-333.17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals