 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
WARNING
Diesel fuel is flammable. Do not work on fuel system in presence of spa rks or
open flame. To do so could result in serious injury to personnel.
Fuel vapors are toxic. Avoid prolonged exposure or breathing of fumes. Work
in well-ventilated area. Failure to do so could result in serious injury to
personnel.
NOTE
If may be necessary to install adapters in soft-jawed vise to perform steps 1
through 6.
1.
INSTALL SCREEN (1), TWO CHECK VALVES (2), AND SPRING (3) ON PRIMARY FUEL FILTER WATER
SEPARATOR ADAPTER (4).
2.
PLACE BEZEL (5) ON BUTTON (6), DIAPHRAGM (7), AND ON PIS TON (8)
3.
POSITION PISTON (8) ON SPRING (3), GENTLY APPLY PRESSURE ON BEZEL (5) TO COMPRESS SPRING
(3), AND SCREW BEZEL (5) ONTO PRIMARY FUEL FILTER WATER SEPARATOR ADAPTER (4).
4.
INSTALL BYPASS ASSEMBLY (9).
5
INSTALL THREE PLUGS (10), THREE TEES (11), SENSOR (12), AND FOUR ELBOWS (13)
6.
INSTALL BUSHING (14), CHECK VALVE (15), THREE ADAPTERS (16), AND FUEL SENSOR (17).
7.
INSTALL PRIMARY FUEL FILTER WATER SEPARATOR ADAPTER (4) AND TWO BOLTS (18).
8.
INSTALL SECONDARY FUEL FILTER ADAPTER (19) AND TWO BOLTS (20)
9.
CONNECT SIX FUEL HOSES (21).
10.
INSTALL WIRE (22), NEW LOCK WASHER (23), AND NUT (24).
11.
CONNECT CONNECTOR (25) TO FUEL SENSOR (17).
NOTE
Follow-on Maintenance:
Install fuel filter elements (page 4-44).
Connect batteries (page 2-29).
Prime fuel system (TM 9-2320-363-10).
Change 3 4-49
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals