Installation (Cont) -699580036

TM9-2320-363-20-2

OIL

COOLER,

CORE,

AND

OIL

FILTER

ADAPTER

REPLACEMENT

(CONT)

INSTALL TWO NEW SEAL RINGS (1 O) IN OIL FILTER ADAPTER (2).

CAUTION

Make sure all old gasket material is removed from core and oil cooler mating

s u r f a c e s . Failure to do so could cause damage to engine.

INSTALL NEW GASKET (11) ON CORE (12).

10. INSTALL CORE (12) IN OIL COOLER (8).

CAUTION

M a k e sure seal rings are not dislodged when installing oil cooler on oil filter

a d a p t e r . Failure to do so could cause damage to engine.

11. INSTALL OIL COOLER (8) ON OIL FILTER ADAPTER (2).

12. INSTALL SEVEN LONG BOLTS (13) AND THREE SHORT BOLTS (14) ON OIL COOLER (8).

13. TIGHTEN 10 BOLTS (13 AND 14) TO 22-28 LB-FT (30-38 N.m) IN SEQUENCE SHOWN.

4-12