 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
INSPECTION
Inspect oil filter adapter for cracks, nicks, or damaged threads.
INSTALLATION
1.
COAT NEW GASKET (2) WITH THIN FILM OF ENGINE LUBRICATING OIL.
2.
FILL NEW OIL FILTER ELEMENT (1) APPROXIMATELY 2/3 FULL WITH ENGINE LUBRICATING OIL
3.
THREAD NEW OIL FILTE R ELEMENT (1) ON ADAPTER (3) BY HAND UNTIL NO FILTER ELEMENT SIDE
MOVEMENT IS EVIDENT.
CAUTION
To prevent damage to filter element, do not use filter wrench for installation.
4.
TIGHTEN OIL FILTER ELEMENT (1) ADDITIONAL 2/3 TURN.
NOTE
M916A1 serial numbers 465379 through 465446 and 662068 through 662079,
M916A2, M917A1, and M917A1 w/MCS have no oil bypass filter.
5.
REPEAT STEPS 1 THRU 4 FOR REMAINING OIL FILTER ELEMENTS.
NOTE
Follow-on Maintenance:
Top-off engine oil (Unit PMCS, TM 9-2320-363-20-1).
Change 3 4-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals