Figure C-22. Steering Radius Template

TM 9-2320-360-34-2

(1)

Fabricate from 1/8 in. (3.2 mm) aluminum plat e.

(2)

Cut aluminum plate to 11 X 17 in. (28 X 43 cm).

(3)

Using file or grinder, remove any sharp edges.

(4)

Using punch or awl, scribe a line 3/4 in. (1.9 cm) from bottom of plate.

(5)

Scribe second line 90 degrees from first line, 8 1/2 in. (22 cm) form edge of plate (6) Using compass, scribe lines

at 7 1/2 degrees, 10 1/2 degrees, 34 1/2 degrees and 37 1/2 degrees from line made in step (4).

(7) Repeat step (6) for other side of template.

(8) Using letter punches, identify the 34 1/2 and 37 1/2 degree lines as "FRONT" and the 7 1/2 and 10 1/2 degree

lines and "REAR".

Figure C-22. Steering Radius Template

C-16 Change 1