Figure C-14. Threaded Rod (318 inch)

TM 9-2320-360-34-2

(1)

Fabricate from 3/8 in. -16 threaded steel rod.

(2)

Using hacksaw, cut rod to 5 in. (127 mm) length.

(3)

Using file or grinder, remove any sharp edges.

(4)

Using hacksaw, cut screwdriver-size notch in one end of rod.

(5)

All dimensions are in inches (millimeters).

Figure C-14. Threaded Rod (318 inch)

(1)

Fabricate from 1/2 in. (13 mm) thick mild steel stock.

(2)

Using torch, cut steel stock to dimensions shown.

(3)

Using grinder, remove rough edges.

(4)

All dimensions are in inches (millimeters).

Figure C-15. Yoke Holder (PN 2HD798)

C-9