Figure C-6. Wire Hook

TM 9-2320-360-34-2

(1)

Fabricate from 1/8 in. (3.2 mm) diameter steel welding rod or equivalent stiff wire.

(2)

Using cutting pliers, cut welding rod to 6 in. (150 mm) length or longer.

(3)

Using machinist's vise, bend 112 in. (13 mm) length of rod 90 degrees.

(4)

All dimensions are in inches (millimeters).

Figure C-6. Wire Hook

(1) Fabricate from flat shim stock 0.02 x 3/32 x 30 in. (0.5 x 2.38 x 762 mm).

(2) Cut shim stock into ten 3 in. (76.2 mm) pieces .

(3) All dimensions are In inches (millimeters).

Figure C-7. Shims

C-5