Assembly (Cont.) -726030530

TM 9-2320-360-34-2

28-2. WINCH REPAIR (CONT)

(67) Install new preformed packing (88) on clutch end

cover (89).

(68) Install two threaded rods (90 ) on opposite ends

of clutch adapter (75).

(69) Install clutch end cover (89) on threaded rods

(90).

(70) Install two nuts (91) on threaded rods (90).

Tighten until mating surfaces of clutch end cover

(89) and clutch adapter (75) meet.

(71) Install four new lockwashers (92) and screws

(93) on clutch end cover (89).

(72) Remove two nuts (91) and threaded rods (90)

from clutch end cover (89).

(73) Install two new lockwashers (92) and screws

(93) on clutch end cover (89).

(74) Tighten six screws (93) to 35 lb-ft (47.5 Nm).

28-30