 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
28-2. WINCH REPAIR (CONT)
(81) Remove seal ring (104) from motor end
support (74). Discard seal ring.
NOTE
Do steps (82) and (84) if bushings fail
inspection.
(82) Press small bushing (105) from motor end
support (74).
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(83) Remove retaining ring (106) from motor
end support (74). Discard retaining ring.
(84) Press large bushing {(107) from motor end
support (74).
WARNING
Winch drum weighs 450 lb (204 kg).
Keep out from under winch drum.
Failure to comply may result in injury
or death to personnel.
(85) Lower winch drum (87) to ground and
remove lifting device.
(86) Remove
two
screws
(108)
and
lockwashers (109) from winch drum (87).
Discard lockwashers.
28-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals