 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(73) Support winch drum (87) with wooden
blocks.
(74) Attach lifting device to gear end support
(48).
WARNING
Gear end support weighs 125 lb (57
kg). Keep out from under gear end
support.
Failure to comply may
result In Injury or death to personnel.
(75) Remove gear end support (48) from
output shaft (53) using lifting device.
(76) Remove seal ring (100) from gear end
support (48). Discard seal ring.
NOTE
Do step (77)
if
bushings
fail
inspection.
(77) Press bronze bushing (101) and bronze
bushing (102) from gear end support (48).
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(78) Remove retaining ring (103) from gear
end support (48). Discard retaining ring.
(79) Attach lifting device to motor end support
(74).
WARNING
Motor end support weighs 125 lb (57
kg). Keep out from under motor end
support.
Failure to comply may
result In Injury or death to personnel.
(80) Remove motor end support (74) from
output shaft (53) using lifting device.
28-13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals