 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
28-2. WINCH REPAIR (CONT)
(28) Loosen 12 screws (44) on planetary
adapter cover (32).
(29) Remove two screws (44) and lockwashers
(45) at the 6 and 12 o'clock positions from
planetary adapter cover (32).
Discard
lockwashers.
(30) Install two guide screws (46) through
planetary adapter cover (32) and ring gear
(47) and into gear end support (48).
WARNING
Support planetary adapter cover to
prevent personnel injury.
(31) Remove 10 remaining screws (44) and
lockwashers (45) from planetary adapter
cover (32). Discard lockwashers.
(32) Slide planetary adapter cover (32) off
guide screws (46) and remove from ring
gear (47).
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(33) Remove retaining ring (49) and clutch sun
gear (50) from input shaft (27). Discard
retaining ring.
(34) Remove two guide screws (46) from ring
gear (47) and gear end support (48).
WARNING
Ring gear weighs approximately 62 lb
(28 kg). Keep out from under ring
gear. Failure to comply may result in
serious injury or death to personnel.
(35) Remove ring gear (47) from gear end
support (48).
28-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals