 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(2) Remove hose (7) from fitting (8) on valve
solenoid (9).
(3) Remove hose (7) from elbow (10) on
brake housing (11).
(4) Remove hose (12) from elbow (13) on
valve solenoid (9).
(5) Remove hose (12) from elbow (14) on
brake housing (11).
(6) Remove two screws (15), lockwashers
(16), and drive motor (17) from brake
housing (11). Discard lockwashers.
NOTE
Right and left sides are disassembled
the same way. Left side is shown.
(7) Remove two opposite screws (18) and
lockwashers (19) from clutch end cover
(20). Discard lockwashers.
(8) Install two threaded rods (21) in clutch end
cover (20) and clutch adapter (22).
(9) Install two nuts (23) on threaded rods (21).
Tighten nuts until they contact clutch end
cover (20).
(10) Remove four remaining screws (18) and
lockwashers (19) from clutch end cover
(20). Discard lockwashers.
28-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals