 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
27-2.1. AUXILIARY STEERING PUMP REPAIR (CONT)
(25) Install new preformed packing (41) and
plug (42) in valve block (43).
(26) Install new preformed packing (44) and
plug (45) in valve block (43).
(27) Install bearing (46) in valve block (43).
(28) Install two pins (47) in valve block (43).
NOTE
Do step (29) if seat, valve, and
spring were removed.
When properly installed, seat
should be flush with face of valve
block.
(29) Install spring (48), valve (49), and seat
(50) in valve block (43).
(30) Install rod (51) and retaining ring (52) on
valve block (43).
(31) Install piston (53) and wafer plate (54) on
valve block (43).
(32) Install new gasket (55) and valve block
(43) on pump housing (2) with five screws
(56). Torque to 23-26 lb-ft (31-35 N m).
(33) Install new preformed packing (57), new
preformed packing (58), gasket (59), and
compensator body (60) on valve block
(43) with four screws (61).
27-22.10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals