 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
27-2. STEERING PUMP REPAIR (CONT)
(28) install new preformed packing (50) and
plug (51) in valve block (49).
NOTE
Do step (29) if seat, va lve, and
spring were removed.
When properly installed, seat
should be flush with face of valve
block.
(29) Install spring (52), valve (53), and seat
(54) in valve block (49).
(30) Install bearing cup (55) in valve block (49).
(31) Install new preformed packing (56) on rod
(57).
WARNING
Adhesive-sealant can bum easily, can
give off harmful vapors, and Is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
areas. If adhesive-sealant gets on
skin or clothing, wash Immediately
with soap and water.
(32) Coat threads of rod (57) with adhesive-
sealant.
(33) Install rod (57) and new preformed
packing (56) in valve block (49).
(34) Install piston (58), pin (59), and wafer
plate (60) on valve block (49).
(35) Install new gasket (61) and valve block
(49) on pump housing (2) with six screws
(62). Torque to 23-26 lb-ft (31-35 N m).
27-16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals