 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
25-3. AXLE NO. 3 DIFFERENTIAL REPAIR (CONT)
(35) Position rear housing (11) so pinion shaft
(35) points up.
(36) Unstake pinion nut (50) on pinion shaft
(35).
(37) Position jet extractor (51) between teeth of
pinion gear (37) and housing (11) with aid
of assistant.
(38) Remove pinion nut (50) from pinion shaft
(35).
(39) Remove jet extractor (51) from housing
(11).
CAUTION
During removal of pinion gear, do not
allow gear teeth to hit inside of
housing. Damage to equipment may
result.
NOTE
Step down gear and spacers may
come out with pinion gear or stay in
housing.
(40) Remove pinion
gear
(35)
from
rear
housing (11).
(41) Remove step down gear (52) and two
spacers (53) from pinion shaft (35) or
inside rear housing (11).
(42) Remove taper bearing (54), two taper
races (55), and shim (56) from rear
housing (11).
(43) Remove taper race (57) from rear housing
(11).
(44) Remove taper bearing (58) from pinion
shaft (35).
(45) Remove two screws (59) and cover plate
(60) from rear housing (11).
25-42
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals