 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(26) Remove two studs (39) from rear housing
(11).
(27) Remove screw (40) and lockplate (41)
from bearing cap (42).
(28) Remove four capscrews (43), bearing
caps (42), and adjusting nut (44) from
housing (11).
(29) Install crowbar (45) through differential
(36).
(30) install strap on crowbar (45).
WARNING
Differential weighs approximately 750
lb (341 kg) and requires the aid of
assistant to move or lift It. Failure to
use caution may result In Injury to
personnel.
(31) Remove shim (46), differential (36), and
races (47) with aid of assistant.
(32) Remove crowbar (45), strap, shim (46),
and two races t47) from differential 36).
NOTE
Do step (33) only if dowels fail inspection.
(33) Remove tour dowels
(48)
from
rear
housing (11).
NOTE
Remove taper bearings only H
they fail inspection.
To re move taper bearing from
gear side of differential, first
remove cage and rollers from
inner race. Then pry inner race
up high enough to install puller.
(34) Remove taper bearings
(49)
from
differential (36) using puller.
Change 1 25-41
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals