 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
25-3. AXLE NO. 3 DIFFERENTIAL REPAIR (CONT)
b. Disassembly
WARNING
Differential weighs approximately 750
lb (341 kg) and requires the aid of
assistant to move or lift it. Failure to
use caution may result in injury to
personnel.
(1) Install adapter (1) on stand (2) with six
screws (3).
(2) Install differential assembly (5) on adapter
(1) with six screws (6).
(3) Remove two lifting eyes (8) from
differential assembly (5).
(4) Unstake nut (9) on yoke (10).
(5) Position rear housing (11) with input shaft
(12) pointing up.
(6) Position yoke holder (13) on yoke (10).
(7) Remove nut (9), yoke holder, and input
yoke (10) from input shaft (12) using
socket (13.1) with aid of assistant.
Discard nut.
(8) Remove input shaft seal (14) from seal
cover (15). Discard seal.
NOTE
Tag and mark shim.
(9) Remove five screws (16), screw (17), seal
cover (15), and shim (18) from rear
housing (11). Discard seal.
(10) Remove 13 screws (19) from front
housing (20).
NOTE
It may be necessary to loosen
housing by striking with rubber
mallet
(11) Remove front housing (20) from rear
housing (11 ).
(12) Remove taper bearing race (21) from front
housing (20).
(13) Remove plug (22) and preformed packing
(23) from front housing (20).
Discard
preformed packing.
25-38 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals