 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
25-2. AXLE NO. 2 DIFFERENTIAL REPAIR (CONT)
(43) Check backlash of differential (18) to
pinion shaft (13).
(44) Hold pinion shaft (13) so pinion gear (16)
does not move.
NOTE
Do not allow pinion gear to turn while
doing steps (45) thru (47).
(45) Turn differential (18) counterclockwise
until it stops to take up backlash.
NOTE
Shaft from dial indicator must be at
right (900) angle to face of tooth
when in contact.
(46) Install dial indicator (29) on face of
differential gear tooth (33).
(47) Turn differential (18) clockwise until it
stops.
NOTE
Backlash should be 0.0100.013 in.
(0.25-0.33
mm).
To
increase
backlash, reduce thickness of shim.
To decrease backlash, increase
thickness of shim.
(48) Record differential (18) to pinion shaft (13)
backlash measured on dial indicator (29).
(49) Rotate carrier housing (6) so pinion shaft
(13) faces down.
25-20 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals