 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
WARNING
Center shaft weighs 140 lb (64 kg).
Stay clear of center shaft when
supported by lifting device. Center
shaft may fall and cause serious
injury to personnel.
(26)
Place center shaft (26) in press with large
gear up using lifting device.
(27)
Press bearing cone (27) on center shaft
(26).
(28)
Turn center shaft (26) over in press so
that smaller gear is up.
(29)
Install bearing cone (2 8).
WARNING
Adhesive sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(29.1)
Coat threads of two screw holes in center
shaft (26) with adhesive-sealant (item 6,
(29.2)
Install drive coupling 128.1) on center
shaft (26) with two screws (28.2). Torque
to 40 lb-ft (54 Nm).
(30)
Remove center shaft (26) from press with
lifting device.
WARNING
Input shaft weighs 110 lb (50 kg).
Stay clear of input shaft when
supported by lifting device. Input
shaft may fall and cause serious
injury to personnel.
(31)
Place top input shaft (29) in press so
spline end is up.
(32)
Install spacer (30), needle bearing (31),
spacer (32), and needle bearing (31).
23-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals