FORWARD CLUTCH AND TURBINE SHAFT REPAIR (CONT) -726030223

TM 9-2320-360-34-2

22-8.

FORWARD CLUTCH AND TURBINE SHAFT REPAIR (CONT)

e. Installation

(1) Install two new seal rings (1) on turbine shaft (2).

(2) Install outer race (3), roller bearing (4), and inner

race (5) on fifth clutch assembly (6) in

transmission housing (7).

(3) Install fifth clutch alignment fixture (8) on fifth

clutch assembly (6).

WARNING

Compressed air used to lockup fifth

clutch plate will not exceed 30 psi

(207 kPa). Use only with effective

chip

guarding

and

personal

protective

equipment

(goggles/

shield, gloves, etc.).

(4) Apply air pressure to port (9) to lock up fifth

clutch plates.

(5) Remove fifth clutch alignment fixture (8) and

install forward clutch assembly (6) in

transmission housing (7) using lifting tool (10)

while assistant holds air pressure in fifth clutch

assembly (6).

(6) Have assistant stop air pressure when forward

clutch assembly (2) is fully seated in

transmission housing (7).

f. Follow-On Maintenance

(1) Install torque converter housing (para 22-7).

(2) Install main control valve body (para 22-14).

22-46