TORQUE CONVERTER HOUSING/FRONT SUPPORT REPAIR

TM 9-2320-360-34-2

22-7. TORQUE CONVERTER HOUSING/FRONT SUPPORT REPAIR

This task covers:

a. Removal

Assembly

b. Disassembly

Installation

c. Cleaning/Inspection

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Materials/Parts

Torque converter pump removed (para 22-6).

Compound, Sealing, Pipe, Pipe Thread (Item 28,

Appendix B)

Oil, Lubricating (Item 44, Appendix B)

Tools and Special Tools

Tool Kit, Genl Mech (Item 202, Appendix E)

Sealant, Adhesive, Silicone (Item 2, Appendix B)

Compressor, Spring (Item 23, Appendix E)

Solvent, Dry Cleaning (Item 54, Appendix B)

Compressor Unit, Air (Item 24, Appendix E)

Tags, Identification (Item 56, Appendix B)

Eyes, Lifting (Item 40, Appendix E)

Gasket (Item 21, Appendix F)

Goggles, Industrial (Item 57, Appendix E)

Lockwashers (14) (Item 122, Appendix F)

Hammer, Slide (Item 64.1, Appendix E)

Ring, Retaining (Item 247, Appendix F)

Handle, Driver (Item 66, Appendix E)

Ring, Retaining (Item 246, Appendix F)

Installer, Front Support Needle Bearing

Ring, Retaining (Item 238, Appendix F)

(Item 78, Appendix E)

Rings, Seal (2) (Item 273, Appendix F)

Guide Pin Set (Item 60, Appendix E)

Ring, Seal (Item 263, Appendix F)

Puller Kit, Mechanical Slide Hammer

Seal, Oil (Item 308, Appendix F)

(Item 125, Appendix E)

Remover Tool, Bearing (Item 142, Appendix E)

Personnel Required

Remover, Valve Pin (Item 143.1, Appendix E)

Two

Wrench, Torque, 0-300 Lb-In. (Item 235, Appendix E)

Wrench, Torque, 0-175 Lb-Ft (Item 236, Appendix E)

Removal

(1) Loosen two screws (1) inside torque

converter housing (2).

(2) Remove

seven

screws

(3)

and

lockwashers (4) from inside torque

converter

housing

(2).

Discard

lockwashers.

22-24 Change 1