REAR END PLATE REPAIR (CONT) -726030049

TM 9-2320-360-34-2

19-6. REAR END PLATE REPAIR (CONT)

e. Follow-On Maintenance (Cont)

(4) Install flywheel housing (para 19-9).

(5) Install flexplate assembly (para 3-17).

(6) Install oil pan (para 3-20).

(7) Install cylinder heads (para 3-10).

(8) Install injectors (para 4-2).

(9) Install rocker arms (para 3-18).

(10) Install engine brake retarders (para 3-26).

(11) Install engine brake retarder wire harnesses (para 6-16).

(12) Install blower (para 4-6).

(13) Install blower accessory drive hub (para 4-9).

(14) Install air inlet adapter (para 4-5).

(15) Install turbocharger (para 4-11).

(16) Install water pump drive gear (para 3-24).

(17) Install vibration damper and front cover (para 3-15).

(18) Install water pump (para 5-5).

(19) Install secondary fuel filter head (para 4-13).

(20) Install right thermostat housing (para 5-4).

(21) Install left thermostat housing (para 5-3).

(22) Adjust valve clearance, engine brake retarder, and fuel injector timing (para 3-27).

(23) Install 12-volt (rear) alternator/bracket (TM 9-2320-360-20).

(24) Install fuel injector wire harnesses (para 4-3).

(25) Install rocker covers (TM 9-2320-360-20).

(26) Install DDEC oil pressure sensor (TM 9-2320-360-20).

(27) Install thermostats (TM 9-2320-360-20).

(28) Install electronic control module (ECM) (TM 9-2320-360-20).

(29) Install fan clutch (TM 9-2320-360-20).

(30) Install fan belts (TM 9-2320-360-20).

(31) Install fan (TM 9-2320-360-20).

(32) Remove engine from engine stand (para 19-3).

(33) Install air box covers (para 3-8).

(34) Install air box drains (para 3-9).

(35) Install exhaust manifolds (para 3-23).

(36) Install 24-volt (front) alternator/bracket (TM 9-2320-360-20).

(37) Install 150 amp circuit breakers (TM 9-2320-360-20).

(38) Install starter (TM 9-2320-360-20).

(39) Install sending units and attachments (TM 9-2320-360-20).

19-34