|
| |
TM 9-2320-360-34-1
17-6. CONTROL VALVE REPAIR
This task covers:
a. Removal
c. Assembly
b. Disassembly
e. Installation
c. Cleaning/inspection
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Materials/Parts
Control console panels removed
Adhesive-Sealant (Item 6, Appendix B)
(TM 9-2320-360-20).
Grease, Automotive and Artillery (Item 32,
Appendix B)
Tools and Special Tools
Solvent, Dry Cleaning (Item 54, Appendix B)
Tool Kit, Genl Mech (Item 202, Appendix E)
Tags, Identification (Item 56, Appendix B)
Compressor Unit, Air (Item 24, Appendix E)
Lockwashers (3) (Item 120, Appendix F)
Goggles, Industrial (Item 57, Appendix E)
Packings, Preformed (3) (Item 177, Appendix F)
Wrench, Combination, 1-3/8 In. (Item 213,
Packing, Preformed (Item 180, Appendix F)
Appendix E)
Wrench, Combination, 1-1/2 In. (Item 214,
Appendix E)
Wrench, Combination, 1-1/4 In. (Item 215,
Appendix E)
Wrench, Open-End, 15/16 In. and 1-1/16 In.
(Item 227, Appendix E)
a.
Removal
NOTE
· This procedure applies to all three
control valves.
· Tag and mark hoses before
removal.
(1)
Disconnect four hoses (1) from control
valve (2).
(2)
Remove three nuts (3), lockwashers (4),
control valve (2), and screws (5) from
control
valve
bracket
(6).
Discard
lockwashers.
17-20
|
