|
| |
TM 9-2320-360-34-1
17-4. COUNTERBALANCE VALVE BLOCK REPAIR (CONT)
d.
Assembly
(1)
Install new preformed packing (1) on
adapter (2).
NOTE
When properly installed, adapter will
face away from valve solenoid.
(2)
Install adapter (2) in counterbalance valve
(3).
(3)
Tighten jamnut (4) on adapter (2).
(4)
Install two new preformed packings (5)
and two new backup rings (6) on plug (7).
WARNING
Plug and valve cartridge locations
determine if counterbalance valve is
for driver or passenger side. Plug
and valve cartridge must be In
correct
locations
for
driver
and
passenger side winch. Failure to
comply
may
cause
injury
to
personnel and result in reverse winch
operation.
(5)
Install plug (7) on counterbalance valve
(3).
(6)
Install two new preformed packings (8),
four
new
split
rings
(9),
and
new
preformed packing (10) on valve cartridge
(11).
(7)
Install cartridge (11) on counterbalance
valve (3).
(8)
Install solenoid (12) on cartridge (11) with
nut (13).
(9)
Install four new backup rings (14) and
three new preformed packings (15) on
valve cartridge (16).
(10)
Install
valve
cartridge
(16)
on
counterbalance valve (3).
17-16
|
